product image
product image

InteliGen 1000 SC

Order code: IG31000SCBB

Upcoming training: 16.10.2025. Find out more.
The InteliGen 1000 SC is a state-of-the-art paralleling controller for synchronising as well as load/var control. This controller is intended for applications where system control is driven either from panel switches or from an upper- level device such as a system PLC. In addition, this controller can communicate with an engine ECU to read engine specific values and providing generator protections if required. The Inteligen 1000 SC is simple to configure and operate which will reduce engineering and commissioning times.
 
  • Controlled by binary signals or Modbus RTU/TCP communication
  • Cooperation with up to 64 additional gen-sets/mains/tie controllers
  • Cybersecurity by design
  • CAN bus redundancy
  • Modbus Client controlling 3rd party devices
  • Built-in PLC interpreter
  • Custom alarms and protections
  • Built-in optional protections (active or passive)  
InteliGen 1000 SC Datasheet

1.39 MB

English (3 Apr 2025)

Manuals

2 files

InteliGen 1000 SC 1.1.0 Global Guide

32.19 MB

English (3 Apr 2025)

InteliGen 1000 SC 1.1.0 New Features List

109 KB

English (3 Apr 2025)

Software

2 files

InteliGen 1000 SC 1.0.1 install suite

76.29 MB

(21 Dec 2023)

InteliGen 1000 SC 1.1.0 Product Suite

32.15 MB

(3 Apr 2025)

EU_Doc_EU-C01-V04-EN_IG1000_IM1000_INEO6_IS2000 Controllers

620 KB

English (7 Dec 2023)

Show resource hub for this product
  • Overview
  • Related products
  • Training
  • Overview
  • Related products
  • Training
    • InteliGen 1000 SC
    Overview
    Related products
    Training
The InteliGen 1000 SC stands for synchronising controller, which is controlled using binary signals to synchronise and control the load. Usually, there is an upper-level PLC sending the binary signals. The InteliGen 1000 SC does not command the ECU, only reads the communication. It is intended for retrofits or applications with PLC.  

Together with the InteliMains 1010 SC controller, the InteliGen 1000 SC provides an ideal solution for complex applications involving mains and bus tie breakers. These controllers are not compatible with any other controllers in the ComAp portfolio.

The InteliGen 1000 SC offers: 

  • Keeping your business and data as safe as possible, meeting the ISA 62443 level 2 - level 3 security requirements
  • CAN bus redundancy ensuring that a redundant CAN line be created and take over in case of CAN failure*
  • Modbus Client which can initiate Modbus communication and control 3rd party devices* 
  • Large built-in PLC interpreter with the use of ComAp's free PLC Editor 
  • Built-in CAN bus logger and event-based history for easy and fast troubleshooting
  • New CAN FD inter-controller communication standard enabling cooperation with up to 64 additional gen-sets/mains/tie controllers
  • Hot-swap redundancy enabling a redundant unit to take over in case the primary controller fails, helping to minimise solution downtime* 
  • User-defined protections and setpoints on top of default protection
  • AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible. AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses. 2.0 for easy connection to your equipment remotely, without worrying about your asset’s IP address
  • Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
  • Secure user management
  • A range of SCADA displays with automatically generated content that can be easily edited in our software tool InteliSCADA
  • Communication options: 3x Ethernet (Modbus TCP, SNMP), 1x RS-485 (Modbus RTU), intercontroller CAN-BUS
  • Reading data from ECU
  • DIN rail/door mounting possibility
  • More precise measuring with a True Root Mean Square measurement feature
  • Free configuration tool InteliConfig for easy and fast commissioning 






* Features available with a software key. 

Alternative products

InteliGen_1000_main
InteliGen 1000

InteliGen 1000 is the most advanced ComAp gen-set controller for multiple gen-sets with paralleling operations, with or without connection to the mains or other source. Intended primarily for switchgear applications, this high-end controller will help you control and monitor demanding projects with critical infrastructures such as datacentres, hospitals and banks. 
 

Upcoming trainings

Hands-on

Parallel Gen-set Controllers Training

16 Oct 2025 960 AUD

2 days Waiting list
Brisbane
English
Power Generation
Paralleling Gen-set Controllers Training

Location: Brisbane

Training fee: 960 AUD per person, excluding GST

Capacity: 6 participants

The Paralleling Gen-set Controllers training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 1000. 



We advise all participants to complete the Single Gen-set Controllers Training prior to enrolling in this program. 

InteliGen

Hands-on

InteliGen 1000 & InteliConfig Familiarization

29 Oct 2025 200 £

2 days Waiting list
Oldbury
English
Power Generation
InteliGen 1000 & InteliConfig Familiarization (face-to-face course)

Location: ComAp Control Limited, Unit 1B, Swallowfield Courtyard, Wolverhampton Road, Oldbury, West Midlands, B69 2JG

Training fee: £200 per person

Capacity: 6 participants


Learn how to master ComAp´s advanced paralleling controller for complex applications, the InteliGen 1000. During the course, participants will explore the functuonalities and unique features of the InteliGen 1000 controller, and its integration with the InteliConfig configuration software. 

 

This hands-on training will help you get a practical experience in configuring, monitoring, and optimisng the performance of the InteliGen 1000 controller using our intuitive and easy-to-use software InteliConfig. Through practical applications and real-world scenarios, the participants will gain valuable insights into maximising the potential of this advanced paralleling controller. 

InteliGen, InteliMains 1010, InteliMains 1010 SC

Hands-on

Single & Paralleling Gen-set Controllers Training

4 Nov 2025 880 €

4 days Waiting list
Prague
English
Power Generation
Single & Gen-set Controllers Training

Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic

Training fee: 220 EUR per person per day

Capacity: 18 participants

Single Gen-set Controllers Training

First part of our training will provide the necessary resources to learn all about working with ComAp controllers and efficiently managing power systems for both newcomers seeking foundational insights and seasoned professionals aiming to fine-tune their skills. Engaging in collaborative learning experiences and hands-on practice, the participants will gain confidence in navigating the complexities of working with our InteliLite 4 family of controllers.



Paralleling Gen-set Controllers Training

Second part of the training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 4 200, InteliGen 500 G2 and InteliGen 1000.

InteliLite, InteliGen, InteliNano, InteliSys

Hands-on

InteliGen 1000 & InteliConfig Familiarization

26 Nov 2025 200 £

2 days Waiting list
Oldbury
English
Power Generation
InteliGen 1000 & InteliConfig Familiarization (face-to-face course)

Location: ComAp Control Limited, Unit 1B, Swallowfield Courtyard, Wolverhampton Road, Oldbury, West Midlands, B69 2JG

Training fee: £200 per person

Capacity: 6 participants


Learn how to master ComAp´s advanced paralleling controller for complex applications, the InteliGen 1000. During the course, participants will explore the functuonalities and unique features of the InteliGen 1000 controller, and its integration with the InteliConfig configuration software. 

 

This hands-on training will help you get a practical experience in configuring, monitoring, and optimisng the performance of the InteliGen 1000 controller using our intuitive and easy-to-use software InteliConfig. Through practical applications and real-world scenarios, the participants will gain valuable insights into maximising the potential of this advanced paralleling controller. 

InteliGen, InteliMains 1010, InteliMains 1010 SC

Hands-on

Single & Paralleling Gen-set Controllers Training

2 Dec 2025 720 €

4 days 3 / 18spots left
Prague
Czech
Power Generation
Single & Paralleling Gen-set Controllers Training

Místo konání: U Uranie 1612/14a, Praha 7, 17000, Czech Republic

Cena: 180 EUR/osoba/den/cena bez DPH

Kapacita: 18 účastníků



Single Gen-set Controllers Training

První část školení je zaměřena na kontrolery ze skupiny InteliLite 4 .

Účastníci se seznámí se základy řízení samostaných motorgenerátorů v ostrovním režimu nebo v zapojení paralelně se sítí.


Paralleling Gen-set Controllers Training

Druhá část školení je zaměřena na InteliGen 4 200, InteliGen 500 G2 a InteliGen 1000 kontrolery.

Účastníci budou seznámeni se základy komplexních zapojení využívajících několik gen-setů v ostrovním provozu nebo zapojených paralelně k síťovém provozu.



Po dokončení tohoto školení budete vědět, který výrobek společnosti ComAp vybrat, kde najít podrobné informace o používání produktu a jak nastavit řídící jednotku. Dále také získáte znalosti o rozšíření možností řídící jednotky pomocí příslušenství řídící jednotky ComAp, včetně informací o systémech vzdáleného monitorování a řízení. 

InteliLite, InteliNano, InteliGen, InteliSys

Hands-on

Parallel Gen-set Controllers Training

5 Feb 2026 980 AUD

2 days 5 / 6spots left
Perth
English
Power Generation
Paralleling Gen-set Controllers Training

Location: Perth, Unit 1, 74 Wittenoom Street, East Perth, Western Australia 6004

Training fee: 980 AUD per person, excluding GST

Capacity: 6 participants

The Paralleling Gen-set Controllers training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 1000. 



We advise all participants to complete the Single Gen-set Controllers Training prior to enrolling in this program. 

InteliGen

Hands-on

Single & Paralleling Gen-set Controllers Training

10 Feb 2026 1000 €

4 days 17 / 18spots left
Prague
English
Power Generation
Single & Gen-set Controllers Training

Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic

Training fee: 250 EUR per person per day

Capacity: 18 participants

Single Gen-set Controllers Training

First part of our training will provide the necessary resources to learn all about working with ComAp controllers and efficiently managing power systems for both newcomers seeking foundational insights and seasoned professionals aiming to fine-tune their skills. Engaging in collaborative learning experiences and hands-on practice, the participants will gain confidence in navigating the complexities of working with our InteliLite 4 family of controllers.



Paralleling Gen-set Controllers Training

Second part of the training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 4 200, InteliGen 500 G2 and InteliGen 1000.

InteliLite, InteliGen, InteliNano, InteliSys

Hands-on

Single & Paralleling Gen-set Controllers Training

12 May 2026 720 €

4 days 18 / 18spots left
Prague
Czech
Power Generation
Single & Paralleling Gen-set Controllers Training

Místo konání: U Uranie 1612/14a, Praha 7, 17000, Czech Republic

Cena: 180 EUR/osoba/den/cena bez DPH

Kapacita: 18 účastníků



Single Gen-set Controllers Training

První část školení je zaměřena na kontrolery ze skupiny InteliLite 4 .

Účastníci se seznámí se základy řízení samostaných motorgenerátorů v ostrovním režimu nebo v zapojení paralelně se sítí.


Paralleling Gen-set Controllers Training

Druhá část školení je zaměřena na InteliGen 4 200, InteliGen 500 G2 a InteliGen 1000 kontrolery.

Účastníci budou seznámeni se základy komplexních zapojení využívajících několik gen-setů v ostrovním provozu nebo zapojených paralelně k síťovém provozu.



Po dokončení tohoto školení budete vědět, který výrobek společnosti ComAp vybrat, kde najít podrobné informace o používání produktu a jak nastavit řídící jednotku. Dále také získáte znalosti o rozšíření možností řídící jednotky pomocí příslušenství řídící jednotky ComAp, včetně informací o systémech vzdáleného monitorování a řízení. 

InteliLite, InteliNano, InteliGen, InteliSys

Hands-on

Single & Paralleling Gen-set Controllers Training

16 Jun 2026 1000 €

4 days 18 / 18spots left
Prague
English
Power Generation
Single & Gen-set Controllers Training

Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic

Training fee: 250 EUR per person per day

Capacity: 18 participants

Single Gen-set Controllers Training

First part of our training will provide the necessary resources to learn all about working with ComAp controllers and efficiently managing power systems for both newcomers seeking foundational insights and seasoned professionals aiming to fine-tune their skills. Engaging in collaborative learning experiences and hands-on practice, the participants will gain confidence in navigating the complexities of working with our InteliLite 4 family of controllers.



Paralleling Gen-set Controllers Training

Second part of the training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 4 200, InteliGen 500 G2 and InteliGen 1000.

InteliLite, InteliGen, InteliNano, InteliSys

Hands-on

Single & Paralleling Gen-set Controllers Training

3 Nov 2026 1000 €

4 days 18 / 18spots left
Prague
English
Power Generation
Single & Gen-set Controllers Training

Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic

Training fee: 250 EUR per person per day

Capacity: 18 participants

Single Gen-set Controllers Training

First part of our training will provide the necessary resources to learn all about working with ComAp controllers and efficiently managing power systems for both newcomers seeking foundational insights and seasoned professionals aiming to fine-tune their skills. Engaging in collaborative learning experiences and hands-on practice, the participants will gain confidence in navigating the complexities of working with our InteliLite 4 family of controllers.



Paralleling Gen-set Controllers Training

Second part of the training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 4 200, InteliGen 500 G2 and InteliGen 1000.

InteliLite, InteliGen, InteliNano, InteliSys

Hands-on

Single & Paralleling Gen-set Controllers Training

1 Dec 2026 720 €

4 days 18 / 18spots left
Prague
Czech
Power Generation
Single & Paralleling Gen-set Controllers Training

Místo konání: U Uranie 1612/14a, Praha 7, 17000, Czech Republic

Cena: 180 EUR/osoba/den/cena bez DPH

Kapacita: 18 účastníků



Single Gen-set Controllers Training

První část školení je zaměřena na kontrolery ze skupiny InteliLite 4 .

Účastníci se seznámí se základy řízení samostaných motorgenerátorů v ostrovním režimu nebo v zapojení paralelně se sítí.


Paralleling Gen-set Controllers Training

Druhá část školení je zaměřena na InteliGen 4 200, InteliGen 500 G2 a InteliGen 1000 kontrolery.

Účastníci budou seznámeni se základy komplexních zapojení využívajících několik gen-setů v ostrovním provozu nebo zapojených paralelně k síťovém provozu.



Po dokončení tohoto školení budete vědět, který výrobek společnosti ComAp vybrat, kde najít podrobné informace o používání produktu a jak nastavit řídící jednotku. Dále také získáte znalosti o rozšíření možností řídící jednotky pomocí příslušenství řídící jednotky ComAp, včetně informací o systémech vzdáleného monitorování a řízení. 

InteliLite, InteliNano, InteliGen, InteliSys

Webinar Recordings

Webinar Recordings

Generator Synchronizing Controllers

27 Oct 2020 Free

48m 38s English

Webinar Recordings

IG200 & IG500 Product Training

29 Apr 2020 Free

InteliGen200_fcb_2.png.aspx
51m 32s English

Key benefits 

CAN Bus redundancy

Connection for up to 64 controllers

Communication features

Easy data sharing

PC Tools

PLC

Cyber security

Local support you can count on

Your operation depends on everything running smoothly. Our experts are here to make sure of that. We offer:

  • 24-hour support on working days
  • Local contacts in 179 countries
  • Remote and in-person trainings and a range of support materials
  • Expert consultation, troubleshooting, and much more
CONTACT TECHNICAL SUPPORT

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative. 

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .