InteliATS2 70

InteliATS2 70

Order code: IA270XXXBAA

InteliATS2 70 is an Automatic Transfer Switch (ATS) controller for easy and fast switching between two independent power sources. It monitors and controls the mains supply and its voltage, frequency, and current, with the possibility to connect to a single gen-set. The InteliATS2 70 is designed with high-level security features, and it is easy to use and configure using ComAp’s InteliConfig configuration tool. InteliATS2 controllers are ideal for managing switching power supply in various settings such as administration buildings, schools, factories, hospitality, and other facilities to avoid power outages and potential financial or material damages.

Mains-to-Mains or Mains-to-Generator application
Built-in PLC blocks
Closed transition
Cybersecurity by design
RS485 on board
Precise current measurement
Remote control

InteliATS2 70 Datasheet

English (14 Aug 2024)

English 14 Aug 2024

Spanish 15 Aug 2024

Manuals

3 files

English (19 Feb 2024)

English (17 May 2023)

English (16 Oct 2023)

Software

2 files

English (5 Feb 2024)

English (4 Dec 2024)

InteliATS2-CE-Conformity-Declaration

English (3 May 2024)

English (25 Jan 2023)

Show resource hub for this product

Overview
Related products
Resources

Overview
Related products
Resources

Easy to install, configure and use, the InteliATS2 70 will ensure swift switching from one power source to another to keep your business and data safe.

The InteliATS2 70 offers:

Mains-to-Mains or Mains-to-Generation applications
Closed Transition (short time parallel), ensuring transition initiates only when both breakers/contactors are in sync. This transition is suitable for systems where no break (no blackout) changeover is required. Option to control motorised circuit breakers, contractors, or changeover switches.
Simple configuration, monitoring and control both on-site and remotely thanks to the settings available through ComAp’s InteliConfig, PC monitoring and configuration tool
Precise current measurement in all phases
Built-in PLC blocks
8 binary outputs, 8 binary inputs (2 high-current binary outputs)
Detailed Real Time Clock event and performance log, helpful for technical support to understand the sequence of events in case of a potential operational issue
Slot for extension plug-in module for 4G-GPS, BI/BO, Ethernet support
Broad communication capabilities for internet access, Modbus, SNMP
AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible.
AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses.
to connect to your equipment remotely, without worrying about your asset’s IP address
Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
Support for InteliSCADA, our tool for SCADA creation and monitoring
Notification alerts via SMS and email
Strong security features keeping your business and data as safe as possible
Load shedding ensuring the most important loads are running even when there is a lack of power
Elevator switch, enabling selected devices to prepare for a short-term power outage when switching between power source
User-defined protections and setpoints
Event-based history log for easy troubleshooting
Multi-purpose schedulers
Multilingual support and translator option
Controller size cut-out: 172 x 112mm

Please check the manual for a full list of supported controllers and applications.

Accessories

CM3-Ethernet

An easy-to-use communication solution to help connect gen-set controllers online via wired connection. This plug-in communication module enables remote monitoring and control for the gen-set controllers and provides access to various gen-set values - engine values, generator, load and Mains electrical values - alarms and history from anywhere.

EM-BIO8-EFCP

Binary I/O plug-in module with earth fault current protection measurement.

CM-4G-GPS

An easy-to-use and highly efficient solution for connecting gen-set controllers online via 4G network. Enables remote monitoring and tracking of the gen-set’s exact position, helping to optimise its uptime and reduce maintenance costs.

CM-RS232-485

Communication module enabling integration of genset controller into the local monitoring system over Modbus RTU and a quick connection to ComAp software tools for configuration and monitoring InteliConfig and InteliSCADA.

WebSupervisor

WebSupervisor is a cloud-based system designed for monitoring, data analysing and management of ComAp and third-party devices. It provides you with an easy overview of all your devices, their operational status, location and other important data, and alerts you in case of potential issues. Using its powerful reporting and analysis tools, you can optimise the revenue for your gen-set fleet, minimise downtime and reduce maintenance costs.

CM2-4G-GPS

An easy-to-use and highly efficient solution for connecting gen-set controllers online via 4G network. Enables remote monitoring and tracking of the gen-set’s exact position, helping to optimise its uptime and reduce maintenance costs.

InteliConfig

InteliConfig is an intuitive software tool enabling simple and effective configuration and commissioning of gen-set controllers and peripherals, helping you save time and optimise project costs. The tool is compatible with InteliLite, InteliGen, inteliMains, and InteliATS controllers.

Alternative products

InteliLite 4 Remote Display (SW)

InteliLite 4 Remote Display (SW) is a remote display software for InteliLite 4 controllers, acting as a remote display for InteliLite 4, InteliATS2 or InteliGen4 200 controllers. The remote display provides the same controls and shows the same gen-set related data as the connected controllers.

InteliATS2 50

InteliATS2 50 is an Automatic Transfer Switch (ATS) controller for easy and fast switching between two independent power sources. It monitors and controls the mains supply and its voltage and frequency, with the possibility to connect to a single gen-set. The InteliATS2 50 is designed with high-level security features, and it’s easy to use and configure using ComAp’s InteliConfig configuration tool. InteliATS2 controllers are ideal for managing switching power supply in various settings such as administration buildings, schools, factories, hospitality, and other facilities to avoid power outages and potential financial or material damages.

Substitute of

InteliATS NT PWR

InteliATS NT Power (PWR) is an Automatic Transfer Switch (ATS) controller for easy and fast switching between two independent power sources. It monitors and controls the mains supply and its voltage, frequency, and current with the possibility to connect to a single gen-set. The InteliATS NT PWR is easy to use and configure using ComAp’s LiteEdit, PC tool for configuring gen-set controllers and their peripherals.

Frequently Asked Questions

Show all

Can I unlock my controller?

If you have forgotten your controller password, it can be found using the password decode function.

You will need the following information about your device:

serial number
"password decode" number

Both numbers can be obtained through the monitoring software relevant to the device.

Serial number is available in Controller info
Password decode number is available in Values / Info

You can also show these numbers on your device's display. Typically, this requires a sequence or combination of buttons to be pressed. Details can be found typically in the device Operator guide.

Once you have these numbers, please contact your ComAp distributor and they will help you get your password back.

I cannot program my controller, it looks dead. How do I restore a controller with broken firmware?

The controller firmware does not usually break by itself however it can be damaged during controller programming, typically if power is lost during the process. If there does not seem to be a hardware issue with the controller there is an option to restore the controller using a process called ‘Boot Jumper’ programming.

This can be described as a sequence of steps you need to perform to allow the configuration tool to write new firmware into the device.

The steps typically are:

Physically connect the controller to your PC.
Power the controller on and initiate connection and firmware programming from the software tool menu.
The software will ask you to switch the device off, close the Boot Jumper and switch the device back on.
The programming will then proceed and you will receive further instructions during the process.

The boot jumper can be found either on the communication module (where plug-in modules are used) or on the device itself, typically under a rubber grommet, next to the dongle slot.

The description above is not enough? Try our Booot jumper training video.

How do I connect to my ComAp controller? What types of connections are supported?

ComAp offers a wide range of options to connect to your controller:

RS232 / RS485
USB - USB A<->B (usually a printer cable)
Internet connection - LAN, GPRS, 3G, 4G

Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT).

Each ComAp device usually allows for multiple ways of connection. The simplest one supported by the majority of our devices is the RS232 (serial) connection. For this, you need an RS232 cable (null modem) and if your PC is not equipped with an RS232 port you need a USB<->RS232 converter.
USB connections are very common. Almost all ComAp devices support connection using simple USB A<->B cable (printer cable) for easy configuration. Some devices can be powered from the USB port for programming to allow easy configuration right on your desk.
Other connection types: Internet connection (LAN, GPRS, 3G, 4G), Modbus RTU, Modbus TCP, SNMP, AirGate, Modem.
Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT). Not all types of connection are possible on each device. You can find all the details related to this topic in your device's Comprehensive guide or Communication guide.

Detailed information about connection to:
InteliLite NT, InteliATS NT, InteliCompact NT is available IL-NT, IA-NT, IC-NT Communication Guide (page 21)
InteliGen-NT, InteliSys-NT, InteliMains-NT is available in IGS-NT Communication Guide (page 19)
InteliLite is available in Global Guide InteliLite AMF25 Global Guide (page 126)

I cannot connect to my controller using the Internet or AirGate connection, why?

Usually connecting to the controller over the internet is straightforward and works out of the box. However, there are a few parameters that need to be set correctly.

Make sure you have the latest firmware in the controller itself but also in all the communication modules (plug-in, built-in or external).
- Communication modules that supports connection via the internet
  - CM-4G-GPS
  - CM-Ethernet
  - CM-GPRS
  - InternetBridge-NT 4G
  - InternetBridge-NT
  - IB-Lite
  - IB-COM (Built-in communication module for NTC controllers)
  - IL-NT GPRS

Ensure the communication interface is configured correctly.
- CM-4G-GPS, CM-Ethernet, CM-GPRS - Can be set in the controllers setpoints on the unit itself or using InteliConfig configuration software.
- IB-COM, IB-Lite - Use web interface - just connect to http://<controller-ip-address>/sp_index.htm using your favourite web browser.
- InternetBridge-NT 4G, InternetBridge-NT - Requires a software tool called IBNTConfig(https://www.comap-control.com/products/detail/ib-nt-config) and an USB A<->B cable for configuration. This way you can also enable MODBUS, SNMP etc.

Make sure there is no firewall blocking your connection. Consult your IT specialist or ISP if not sure. If you use a firewall, make sure the following ports are open for communication:
- The device must be able to send data to the AirGate server at UDP port 6127 and TCP port 23. The TCP port can be changed in the module setup to 21 if needed.
- TCP port 44445 is required for WebSupervisor connection.
- Port 80 is used for accessing the communication module web interface.
- Port 502 is used for Modbus TCP communication (enabled by default).
- Port 161 is used for SNMP (needs to be enabled).

How do I change the controller firmware? Where can I get the latest firmware?

You can download the latest firmware package on the webpage of the device. You can easily navigate there through the ‘Products’ section or just use the Search function. If you cannot find the firmware on the website or if you require different than the offered version do not hesitate to contact our support team.

The firmware upgrade itself is easy to perform. You need the appropriate configuration software and a connection to the controller (preferably a direct connection). Prior to initiating the update process, we strongly recommend you to save a complete backup of your device.

It usually consists of several steps:

Create a controller back up.
Update the device firmware. It will contain default Configuration Archive and default Application.
Change the Application (SPtM, MiNT, MCB, MGCB, BTB, etc) to the required type (by programming appropriate default archive to the controller).
Use the Import Configuration Wizard to restore your previous configuration. In some cases manual interventions might be needed during this step.
Optional: Update the connected display firmware or device communication module firmware.

Should you be unsuccessful in programming the new version, the rollback procedure is to install previous firmware version and use your back up to restore the controller to its original state before the firmware upgrade was attempted.